gab
New Member
Posts: 6
|
Post by gab on Dec 15, 2009 0:52:44 GMT 1
 Ok so first time here, just discovered this forum and its great. So here`s the thing, got my hand on a ZB 30 a while ago. Discovered recently that the tripping lever is broken of. Just looking for a way to fix it. Will the tripping lever of a Bren work?? Thanks. |
|
|
|
Post by Peter Wells on Dec 17, 2009 17:32:45 GMT 1
You're right Gab. Great forum and ready access to piles of expertise. As for your problem - I have examples of both guns so will check this week-end and let you know. At worst I can give you dimensions of the 30s part and you can get yours remade. I must first ask though - is this legal where you are located?   |
|
gab
New Member
Posts: 6
|
Post by gab on Dec 18, 2009 22:06:05 GMT 1
Thanks for the help, as for your question the answer is yes. I`m one of the few lucky ones with the proper license. This nice little piece is the center piece of my collection.
|
|
|
|
Post by Peter Wells on Dec 19, 2009 12:43:37 GMT 1
Great.  You're in luck Gab. The trigger/tripping lever assembly (including the spring and plunger) are identical and interchangeable between the Brens and my Abyssinian contract ZB30. The only difference I can see is that the ZB parts have a slightly finer finish. Don't have spares though.  Cheers |
|
gab
New Member
Posts: 6
|
Post by gab on Dec 22, 2009 11:30:37 GMT 1
Great, thanks for the info. This is gonna make my life alot easier. Think you could send me a picture of the full tripping lever if its to much to ask, from there i`ll probably be able to get my buddy to machine me a new one.
|
|
|
|
Post by Peter Wells on Dec 23, 2009 12:08:39 GMT 1
I can certainly do that Gab but Sarco (www.sarcoinc.com) have the Trip Lever Assy at $10 - part # 'bren036'!
If you are not in the US they will have to send it to a US adress (a mate/family) and they can post it on to you.
Even better would be to post a WTB on this form. One of the guys is bound to be able to help.
Let me know which way you want to go.
|
|
gab
New Member
Posts: 6
|
Post by gab on Dec 24, 2009 21:09:00 GMT 1
I`ll try the want adds but if you could send me a picture anyway just in case I would appreciate it. Thanks and a Merry christmas
|
|
|
|
Post by Peter Wells on Dec 25, 2009 12:32:34 GMT 1
 Sorry about the quality of the pic but good luck Interesting thing about the recoil spring rod - mine has a fat section about 1 inch from the front end. This is not evident in your pic.  Cheers |
|
gab
New Member
Posts: 6
|
Post by gab on Dec 28, 2009 15:21:35 GMT 1
thanks alot for all your help.
|
|
