|
|
Post by actionman on Jun 19, 2006 6:13:50 GMT 1
Hi, I'm building a 1/6th scale Vickers (below) and am trying to find the measurements of a typical WW2 British 250 round belt ammo box such as the "Box, Ammunition, Small Arms, H.51" Can anyone help me please? Thanks.  |
|
|
|
Post by actionman on Jul 27, 2006 10:53:39 GMT 1
Can I just say how completely underwhelmed I've been by the response to my request for help?
Thanks a lot.
|
|
|
|
Post by NZ L1A1 Collector on Jul 27, 2006 11:17:53 GMT 1
I would help you out but I don't have a box to take measurements of.
your Vickers looks really good.
|
|
|
|
Post by actionman on Jul 27, 2006 14:22:19 GMT 1
thanks, Kevin,
much appreciated.
|
|
|
|
Post by Richard Fisher on Jul 27, 2006 17:46:00 GMT 1
My apologies, I must have missed this post when it was first put up. I have the relevant box and the measurements are as follows:
(Looking square on from the front)
Height = 2250mm
Width = 4050mm
Depth = 1150mm
Once again, sorry for not responding earlier.
Richard
|
|
|
|
Post by emmagee on Jul 30, 2006 15:24:41 GMT 1
You do realize you've got the gun turned the wrong way round on the tripod...... long leg goes in the rear....  |
|
|
|
Post by 303gunner on Jul 30, 2006 23:41:58 GMT 1
I have the relevant box and the measurements are as follows: (Looking square on from the front) Height = 2250mm Width = 4050mm Depth = 1150mm Richard I never realised they were quite so big! 7'6" tall (2.25m) and 4 metres long! |
|
|
|
Post by missingsomething on Jul 31, 2006 18:36:05 GMT 1
Humm... mine is:
Height = 22cm
Width = 12cm
Length = 41cm
|
|
|
|
Post by Richard Fisher on Aug 1, 2006 13:39:36 GMT 1
I have the relevant box and the measurements are as follows: (Looking square on from the front) Height = 2250mm Width = 4050mm Depth = 1150mm Richard I never realised they were quite so big! 7'6" tall (2.25m) and 4 metres long! Oops, take the 0 off the end. |
|
|
|
Post by Richard Fisher on Aug 1, 2006 13:40:42 GMT 1
Humm... mine is: Height = 22cm Width = 12cm Length = 41cm Same measurements, different dimensions - difficult to explain without the picture but I meant looking straight on in the same way the picture shows it. |
|
|
|
Post by actionman on Aug 4, 2006 6:23:58 GMT 1
That's great - thanks your your help! (And I'll turn it round on the tripod as well!  ) |
|
)