Post by capt9224 on Nov 10, 2015 6:54:13 GMT 1
I am looking for information on the conversion of the BREN GUN to 7.62 x51mm L4A3. Does any one know what it entails and has the drawings to make the conversion? I will pay for copies of the drawings if necessary. All drawings will have to be readable.
As for parts, I have a Rhodesian 7.62x 51mm and the magazine catch and ejector.
If possible I would pay a master gunsmith to make the conversion, if one wanted to take up this project. I am in Surprise, AZ and my gun is presently rebuilt from a DEMILLED receiver, all welds were X-Rayed and confirmed solid.
As for parts, I have a Rhodesian 7.62x 51mm and the magazine catch and ejector.
If possible I would pay a master gunsmith to make the conversion, if one wanted to take up this project. I am in Surprise, AZ and my gun is presently rebuilt from a DEMILLED receiver, all welds were X-Rayed and confirmed solid.